System Engineering Works manufactures triplex pumps with varied ranges and models.The model are STP 20/ STP 40/ STP60 / STP80 / STP100 / STP125 Triplex model 80 are high pressure pumps flow rate 10 LPM to 300 LPM pressure upto 600 bar with 90% overall efficiency that reduces operating costs. Our triplex model 80 delivers a smooth, consistent flow and eradicates +90% pulsations. Some of the key features of our triplex model 80:
Available in three plungers
For drilling and well service operations
Reinforced seal
Uses ceramic plungers and hard chrome pated for tight alignments
Our Triple Pumps giving customer requirement capacity and pressure.
Triplex Model STP 20
Our triplex pump model 20 pumps operates from 2LPM to 30 LPM and pressure upto 200 barI It features liquid-end construction in forged brass, nickel aluminum bronze and duplex stainless steel for compatibility in a wide range of high pressure liquid pumping applications.
Triplex Model STP 100
System Engineering Works offers extensive line of triplex pumps and triplex model 100 is one of them. This triplex can also be used to extract liquids from fresh water as well as waste water. They can also be used to pump salt water in desalination applications, chemicals and high vapor liquids like carbon dioxide.
flow rate 16 LPM to 500 LPM working pressure upto 750 bar.
MODEL : S.T.P. - 20
Plunger Dia In mm
Max Discharge Pressure In Kg/ Cm2
Strokes Per Minute
100
150
200
250
300
350
400
Litres Per Hour
12
133
37
55
73
92
110
128
146
16
75
65
98
130
163
195
228
260
20
48
102
153
203
254
305
356
407
24
33
146
220
293
366
440
513
586
Recommended Motor in HP
0.5
0.5
1
1
1
1
1.5
APPLICATIONS
PRESSURE CLEANING
Vehicles
Tanks
Floors
Dairy Applications
Food Processors
HYDRO TESTING
Tanks and Vessels
Pipes
Valves & Fittings
Hoses
System testing
SPRAYING
Felt / Wool spraying
Agricultural
Fire Fighting
Air Craft Washing
Poultry / Dair Farms
Spray Drying
INJECTION
Boiler Feed
Gland Sealing
Fuel Oil
Reverse Osmosis
Water Treatment
JETTING
Boiler / Heat Exchanger Tubes
Ships Hull Cleaning
Tank Cleaning
Pipe Lines
Paint Removal
NOTE
BKW Consumption based at 80% over all Mechanical Efficiency.
Capacity Based at 90% Volumetric Efficiency.
Speeds 400 SPM and above only for intermittent duty.
In view of continuous Research & Development the information contained in this brochure is subject to modification without notice.
Jacketed Triplex pumps giving guaranteed against any defect in design, manufacturing or faulty workmanship
for a period of Twelve Months from the date of installation.
MODEL : S.T.P. - 40
Plunger Dia In mm
Max Discharge Pressure In Kg/ Cm2
Strokes Per Minute
100
150
200
250
300
350
Litres Per Hour
12
640
73
110
146
183
220
256
16
360
130
195
260
326
391
456
20
230
203
305
407
509
611
712
24
160
293
440
586
733
879
1026
32
90
521
782
1042
1303
1563
1824
40
57
814
1221
1629
2036
2443
2850
45
45
1030
1546
2061
2576
3092
3607
Recommended Motor in HP
3
5
5
7.5
7.5
10
MODEL : S.T.P. - 60
Plunger Dia In mm
Max Discharge Pressure In Kg/ Cm2
Strokes Per Minute
100
150
200
250
300
Litres Per Hour
12
813
110
165
220
275
330
16
457
195
293
391
488
586
20
293
305
458
611
763
916
24
203
440
659
879
1099
1319
32
114
782
1172
1563
1954
2345
40
73
1221
1832
2443
3054
3664
45
58
1546
2319
3092
3865
4638
54
40
2226
3339
4452
5565
6678
60
32.5
2748
4122
5496
6871
8245
Recommended Motor in HP
5
7.5
10
15
15
MODEL : S.T.P. - 80
Plunger Dia In mm
Max Discharge Pressure In Kg/ Cm2
Strokes Per Minute
100
150
200
250
300
Litres Per Hour
16
796
260
391
521
651
782
20
509
407
611
814
1018
1221
24
354
586
879
1172
1466
1759
32
199
1042
1563
2085
2606
3127
40
127
1629
2443
3257
4071
4886
45
100
2061
3092
4122
5153
6183
54
70
2968
4452
5936
7420
8904
60
57
3664
5496
7329
9161
10993
72
39
5277
7915
10553
13192
15830
80
32
6514
9772
13029
16286
19543
Recommended Motor in HP
15
20
25
30
40
DESIGN FEATURES
Liquid End:
All the Triplex Series Pumps are Designed for almost any medium. Selection of specific material for the liquid end part depends on the physical & chemical properties of the liquid to be handled.
The Liquid end part can be quipped with Cooling‚ Heating or Flushing systems depending upon the application.
The Plunger–Cylinder unit is an excellent arrangement in terms of safety and maintenance.
High Performance non return valves on suction and delivery side. Highly convenient for maintenance.
Power End:
Power end parts are lubricated by splash type arrangement or forced lubrication.
Crank shaft is in high quality forged steel & is supported by antifriction bi–mettalic bearings.
Sturdy‚ balanced design‚ easy for maintenance.
Drives – Direct‚ Geared‚ Belt pulley type.
APPLICATIONS
Hydro testing – at Tranks‚ Vessels‚ Pipes‚ Valves‚ Fittings‚ Hoses.
Injections – Boiler Feed‚ Gland sealing‚ fuel Oil‚ Reverse osmosis‚ Water & Waste Water treatment.
